top of page

Load data for 5.6 x 70 R + .224 | 50gr | Barnes VG

Recommended Powder(s):

5.6 x 70 R + .224 | 50gr | Barnes VG

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 50gr | Barnes VG
Manufacturer SKU:
30198
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.858" | 21.8mm
Caliber:
5.6 x 70 R load data
Case Length (l3):
2.760" | 70.1mm
Cartridge Length (C.O.L.):
3.374" | 85.7mm
Seated Depth:
0.244" | 6.2mm
Shank Seated Depth:
0.244" | 6.2mm
Case Capacity:
39.0 Grains of Water | 2.53 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
37710 psi | 2600 bar
LID:
LID_B444_C921
Last updated:
2025-01-01

Load data for 20 loads in caliber 5.6 x 70 R with .224 | 50gr | Barnes VG bullet and 10 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 4064]*
<<locked>>
88%
33518
89%
**41
94%
Hodgdon TrailBoss
<<locked>>
95%
30893
82%
**69
100%
IMR 3031
<<locked>>
86%
32808
87%
**64
96%
[Lovex D073.6]*
<<locked>>
84%
32793
87%
**09
92%
ReloadSwiss RS 14
<<locked>>
95%
30734
81%
**11
100%
SNPE Vectan Tubal 5000
<<locked>>
88%
33852
90%
**49
95%
[Shooters World Match Rifle]*
<<locked>>
84%
32793
87%
**09
92%
Vihtavuori N135
<<locked>>
92%
33794
90%
**31
97%
[Vihtavuori N140]*
<<locked>>
85%
32895
87%
**82
94%
[Vihtavuori N540]*
<<locked>>
85%
33112
88%
**95
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 4064]*
<<locked>>
81%
25933
69%
**05
90%
Hodgdon TrailBoss
<<locked>>
82%
25019
66%
**18
100%
[IMR 3031]*
<<locked>>
81%
28036
74%
**10
93%
[Lovex D073.6]*
<<locked>>
81%
29849
79%
**23
91%
ReloadSwiss RS 14
<<locked>>
81%
24947
66%
**57
100%
[SNPE Vectan Tubal 5000]*
<<locked>>
81%
27122
72%
**46
92%
[Shooters World Match Rifle]*
<<locked>>
81%
29849
79%
**23
91%
[Vihtavuori N135]*
<<locked>>
81%
23641
63%
**07
91%
[Vihtavuori N140]*
<<locked>>
81%
29240
78%
**67
92%
[Vihtavuori N540]*
<<locked>>
81%
29225
77%
**74
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page